TURNPWR Recovery Drive and Software Compatibility
- To verify your software version, from the DRO screen press Setup. If you have a softkey labeled Install Setup press this key. Enter the password 8891 and press Enter. The installed software version will be displayed at the bottom left of your screen.
- Scroll to “Extras” at bottom of page for offline software details, previous release notes, instructions and software.
- Recovery Drive Kit ID# 1127022-02 can be purchased from your local ACU-RITE distributor.
- You can locate the Console ID on the back of the console or in software under installation setup, tools, and system information.
NOTE: Software updates are available first on acu-rite.com (English).
Console: ID#1280434-NN and ID#1280435-NN
Read me first!
Note: Software update instructions located in the User’s Manual should be read prior to updating to any software version.
*To run the offline software a purchased KEY is required. Contact your authorized ACU-RITE controls distributor to place an order. If installing a network USB KEY follow these instructions:
The off-line software provides a convenient way to write part programs and simulate machine behavior using a standard Windows® computer. Features and functionality are virtually identical to that of the TURNPWR control itself.
Platform: IBM compatible PC.
Operating System: All 32-bit and 64-bit editions of ** WINDOWS VISTA/7/8/8.1/10 are supported.
Available Drive Space: 2GB or higher.
Memory: 1GB or higher.
Display Resolution: 1024×768 (XGA) or higher required. 1440 x 900 (WXGA+) recommended.
Ports: One available USB port for protection device.
Peripherals: Keyboard and pointing device.
***Microsoft®, Windows® and Vista® are registered trademarks of Microsoft Corporation in the United States and/or other countries.