
LMF 9310 inductive encoder
The LMF 9310 Multi-Section Inductive Encoder is a guided measuring system that uses an LMK scanning head with TTL incremental signals and an inductive measuring tape clamped on an integrated guiderail. When properly installed to specifications, this encoder has an Ingress Protection Rating of 67 (IP67), leaving this measurement system virtually unaffected by environmental contaminants (i.e. oil, coolant, etc.). With the incorporation of the included mounting coupling on the scanning head, high mounting tolerances can be realized—especially for longer measuring lengths. Durable, dependable and affordable all-in-one package.
- Available in a variety of lengths
- Accuracy grade ±20µm
- Distance-coded reference marks
- 5v incremental TTL signals
- Durable and rugged scale case
- Traversing speed = 3m/s
- Overall width under 35mm (1.4") wide
- IP67 protection rating
LMF 9310 support
Specifications
Measuring standard | Steel rail with inductive incremental scanning | ||
Accuracy grade | ±20µm | ||
Measuring length ML* | 3,150mm to 18,270mm in 180mm increments | ||
Incremental signals | TTL | ||
Grating period Integrated interpolation Signal Period |
1000µm 50-fold 5µm |
||
Measuring step | 5µm | ||
Reference marks | Distance-coded | ||
Voltage supply without load | 5V DC ±0.1 V/< 260mA | ||
Electrical connection | PUR, with a M23, 12-pin male coupling | ||
Cable length | 0.3m fixed with a 2m – 12m extensions available | ||
Traversing speed | 3 m/s | ||
Required moving force | ≤ 5N | ||
Operating conditions | 0°C to 80°C | ||
Conditions for storage | -20°C to 100°C | ||
Protection EN 60529 | IP67 when mounted as per mounting instructions | ||
Mass | Rail 1.4 kg/m and head 0.2 kg |